VALVES AND COUPLINGS

Full Port Brass Ball Valves are two-piece construction with a chrome plated brass ball,
blowout-proof stem, PTFE seats and double ‘O’ ring stem seal. Quick quarter-turn for easy
operation. For use in plumbing and light industry applications. Standard NPT end connection.
Working Pressure Test Pressure.
600 psi W.O.G. Shell ............. 900 psi. hydrostatic
150 psi A 300° F Seat .............. 80 psi. air
Dimensions inch
Size 1/4 3/8 1/2 3/4 1 1-1/4
Bore 0.39 0.39 0.59 0.79 0.98 1.26
L (IPS) 1.57 1.61 1.93 2.20 2.56 2.99
L (C x C) 1.73 1.81 2.13 2.87 3.47 3.94
H 1.42 1.42 1.54 1.73 1.93 2.17
D 3.15 3.15 3.15 5.12 5.12 5.12

Used primarily for all water applications. Working pressure: 300psi W.O.G.; 150psi W.S.P. 80 Mesh screen, 1/4” thru 3/4” sizes.

Forged Brass Gate Valves have screwed-in-bonnet, non-rising stem, solid wedge disc, integral
seat, NPT threaded or solder joint ends
** high tensile strength. Non-rising stem permits installation where head space is limited.
Dimensions inch
Size 3/8 1/2 3/4 1 1-1/4
L (IPS) 1.50 1.65 1.85 1.97 2.36
L (C x C) – 1.77 2.36 2.76 3.03
H 2.95 2.95 3.39 3.82 4.61
D 1.97 1.97 2.17 2.36 2.76

Y-Pattern Strainers provide protection for equipment having internal moving parts. Has
blow-out outlet for easy clean-out, threaded cap for easy removal. Bronze body and Type
304 stainless steel screen. NPT threaded ends or solder joint ends.
Working Pressure Test Pressure.
300 psi. W.O.G. non-shock Shell ............. 450 psi. hydrostatic
150 psi. W.S.P. saturated
Dimensions inch
Size 1/4 3/8 1/2 3/4 1 1-1/4
L (IPS) 2.76 2.76 3.15 3.94 4.53 5.31
L (C x C) — — 3.15 4.13 4.92 5.71
H 1.73 1.73 1.93 2.28 2.80 3.19
Drain Port 1/4 1/4 1/4 1/4 1/2 1/2
A 1.41 1.41 1.57 1.96 2.52 2.95
B 0.59 0.59 0.70 0.90 1.14 1.42

Ground water-sourced, heat pump applications. This high quality polycarbonate bodied flowmeter has 3/4” MPT nylon threaded connections and 1-10 GPM capacity.

• Manual operated gas shut-off valves for appliances, appliance connector valves and hose end valves. The following agencies have certified these valves: AGA, CGA, ANSI, and ASME

• Forged Body Construction for Greater Strength
• Blowout-Proof Stem Design
• High Cycle Life PTFE Seats and NBR Seal
• Quarter Turn Open/Close Operation
• Positive Shutoff with Zero Leakage
• Rated for temperatures from -20° F to 125° F at pressures from 1/2 – 125 psi.

This 3/4” x 3/4” slip on condensate pan blow out valve is a patented one of a kind item. No more buying little cartridges and trying to find the end of drain lines in the dark. Simply install this unit exiting the evaporator in your residential or commercial AC system, and hook up a 1/4” charging hose to the valve and the other end to your CO2 or Nitrogen tank. Turn the valve one way, and blow out the line. Turn it the other way, and remove any blockage inside the coil.

Used extensively in the ice machine and water cooler industries. Size 3/8” Manitowoc part
#136067-9; Scotsman part 16-0162-00.

Normally closed 24V or 115V slow closing 150 psi solenoid valve for use on ground water source heat pumps. Maximum operating temperature 110°F.

Raychem tube couplings provide a reliable solution for repairing leaks in aluminum or copper/aluminum joints. When heated with a propane torch, these one-piece couplings shrink to securely join and seal refrigerant tubing. Unlike traditional methods like welding or brazing, where joint quality depends on skill and preparation, Raychem couplings consistently create strong, dependable joints.

They are especially useful for joining copper or aluminum in challenging, tight spaces. These couplings offer trouble-free reliability, as their one-piece construction eliminates the risk of parts coming loose due to vibration after assembly. Additionally, Raychem tube couplings are stronger than the tubes they connect, capable of withstanding pressures up to the tubing's burst pressure, pullout forces beyond typical yield strength, and vibration fatigue up to tubing failure.

Installation is straightforward, requiring only a propane torch. No flux, solder, or wrenches are necessary. Just slide the coupling over the tube ends, apply heat, and monitor the color-changing bands at each end, indicating when the installation is complete (approximately 20 seconds for a 3/8" coupling). Since there is no residue, there's no need to flush the tubing. These couplings make it fast and easy to create permanent, reliable joints, even in hard-to-reach places.

They come blister carded and are available in 1/4", 3/8", 1/2", and 5/8" sizes.